How to use Sticker Studio
Follow four steps to make your first sticker, or jump straight to the tool you’re using.
Open Sticker Studio1. Upload your artwork
- Tap Upload your design. To practise, tap Try sample artwork.
- Wait for your design to appear. Tap Replace artwork if you chose the wrong file.
Which file should I use?
Start with a sharp PNG or JPEG. A transparent PNG is ideal for a cut that follows the outline. You can also upload WebP, GIF, SVG or a PDF. The Studio previews the first page of a PDF. The upload limits are 60 MB for artwork and 25 MB for a PDF.
If the file looks blurry, try a larger original or a smaller finished size. When Improve resolution is offered, compare it with Show original. Check fine lines and small text. Use Remove enhancement if the original looks cleaner.
2. Set the cut and size
- Choose Kiss-cut for a larger peel-off backing, or Die-cut for individual stickers with matching backing.
- Pick a shape. Contour follows the design. A circle or rectangle gives you a fixed shape.
- Pick a size above the preview or tap Enter exact size and type both sides in millimetres. Check the Finished sticker size readout.
Get the exact size, fit and bleed right
Refine the cutline or print to the edge
- Under Cutline → Fine-tune the outline, change the margin, smoothing or corner radius. Bridge small gaps can join nearby pieces. Cut interior holes makes openings through the sticker.
- Under Size and layout, Snap to visible artwork trims empty space for the proof. Turn it off to keep deliberate space from the file.
- Choose Inset artwork for a border, Full bleed for colour to the edge, or My artwork already has bleed to use the extra colour in your own file.
3. Choose a material and finish
- Tap Material and choose a swatch. White vinyl is a good starting point for a full-colour logo.
- Tap Print → Finish. Choose Matte for low shine or Gloss for shine across the sticker.
- Use the guides below if you want a raised detail, a spot of shine or solid colour on a specialty material.
4. Check the proof and order
- Tap Quantity & order, pick a quantity, and check the delivered price.
- Tap Review proof. Check the size, cut, material, finish, spelling and placement.
- Tap Add to basket. Check your order, then enter your delivery details and pay at checkout.
Use the proof and order checklist
Most sticker orders dispatch in 1–3 working days. Larger runs and specialist finishes can take longer. Royal Mail Tracked 24 delivery is estimated at 1–2 working days after dispatch. See our shipping policy for delivery options.
Keep the order confirmation. Use the tracking link in your dispatch email when the order is on its way.
Help with a specific tool
Remove a background
Use this to cut around a subject when the image has a plain box behind it.
- Upload your image. Tap Artwork → Remove background.
- Look for Background removed. Proof updated. If needed, tap Remove background from image in the tool.
- Check the edges. Use Erase / restore to fix any missing or leftover parts.
Edit artwork, text or a QR code
- Adjust colour
- Open Artwork and colour. Change hue to shift colours or saturation to change their strength.
- Sticker background
- Pick a solid colour or two colours for a gradient. Choose Material only to show the stock. Remove a background baked into the image if it covers your new colour.
- Move or resize
- Use Move artwork or text to move artwork, text or a QR code. Use the plus and minus buttons to resize the artwork inside the cut. Fit artwork and Rotate are in the layout tools.
- Add or edit text
- Enter your text, then pick its font, colour and size. Use Text outline for a stroke and Exact position for precise placement. Tap Apply text.
- QR code
- Enter the complete link or text, then tap Apply QR code. Size and place it. Leave space around all sides.
Add raised or spot gloss
Raised gloss, also called embossing, gives a detail height you can feel. Spot gloss gives it flat shine.
- Open Print → Print effects and choose Raised gloss or Spot gloss.
- Tap Select object. Hold the detail on the proof, then lift when it highlights. Use Trace area if the automatic selection is too big.
- Tap Show coverage. Check that the highlight covers only the area you want to shine. Use Brush to fix the edges.
Follow the embossing tutorial, including the selection tools
Add white ink
Use white ink under details you want to look solid on clear, holographic, glitter or metallic stock. Leave it off where you want the material to show through.
- Choose a supported material. Tap Print → Print effects → White ink.
- Select the areas to keep solid. On gold, check the white layer that is already there.
- Tap Show coverage. Look for gaps in the areas that should be solid, then refine with Brush.
Change the preview
- Ruler, upper left
- Show or hide the ruler. Read the exact size above the artwork.
- Peel, upper right
- See how the sticker lifts from its backing.
- View, lower left
- Change the preview background, try a scene that fits your size, or change the lighting. Open Fine-tune preview to show the cut guide or adjust the angle and light.
- Reset view, lower right
- Return to the starting view. Drag the sticker to look from a different angle.
Fix a problem
- The cut follows a box.
- Choose Contour and check Snap to visible artwork. Remove the unwanted image background. Bridge small gaps if the design is in several pieces.
- The size differs from what I typed.
- A contour keeps the artwork’s proportions. Read the finished size above the proof or select Use exact rectangle.
- Glitter or metal shows through a face or logo.
- Use Show coverage on the white ink layer. Fill any gaps inside the whole feature.
- I can’t see the embossing.
- Check the layer has coverage. Turn coverage off, choose Low-angle light under View, then tilt the sticker.