MIRON violet glass.
Made yours.
Genuine violet glass. Three 100 ml shapes. Custom labels, designed by you.
Compare the jars, understand the glass and choose the finish for your brand.
Explore custom printed 100 ml MIRON UV violet glass jars
Almost black. Violet in the light.
MIRON’s colour is part of the glass itself. On a shelf it can look almost black; light reveals its violet character. That colour also has a practical role: it changes which wavelengths reach the contents.
A selective filter
According to MIRON’s explanation of its glass, much of the visible spectrum is filtered while selected UVA, violet and near-infrared wavelengths can pass. It creates a different light environment inside the jar from ordinary clear glass.
More precise than “UV protection”
You may see violet glass called “UV glass”. The useful distinction is selective light filtering: it does not block every UV wavelength. Some UVA can pass. Its violet colour is integral to the material, rather than a surface film. Read the manufacturer’s glass FAQ.
Read the light-filter diagram
Light travels from left to right towards a section of violet glass. The selected UVA/violet and near-infrared arrows continue through the glass towards illustrative contents. The arrow for much of the remaining visible spectrum ends at the glass. A colour strip places UVA, violet, other visible colours and near-infrared in order from shorter to longer wavelengths. This is a schematic explanation, with no numerical transmission scale or exact wavelength cutoffs.
MIRON violet glass vs ordinary dark glass.
Both can look almost black. Their composition determines which light reaches the contents. Move the slider to compare the explanations.
50% MIRON illustration revealed
Move the slider to reveal each explanation. This is not a transmission measurement.
Concept illustration, not a measured test. Ordinary dark-glass performance varies with composition, colour and thickness.
Ordinary amber, coloured or black glass
These are different materials, not one quality grade. Amber glass can provide useful protection against parts of the UV spectrum; other coloured or opaque packs behave differently. A cheaper jar is not automatically ineffective. Ask the supplier for a transmission specification that matches the needs of your contents.
Genuine MIRON violet glass
MIRON describes a selective filter which reduces much of the visible spectrum while allowing selected UVA, violet and near-infrared wavelengths to pass. The violet colour is integral to the glass rather than a painted coating. Read MIRON’s comparison of glass types.
For a useful packaging comparison, test the same product, closure, fill level, light exposure, temperature and duration. Match the pack to your contents, then use your own stability results to set storage instructions and shelf life.
Light protection is part of good packaging.
When a product is sensitive to light, its packaging can help manage exposure during storage and display. MIRON presents its selective filter as a way to help reduce light-induced degradation of sensitive ingredients.
What this means for preservation
Independent packaging research supports the broader principle that the container and storage environment matter. A 2021 study of extra virgin olive oil found that both packaging type and the oils’ starting composition influenced resistance to oxidation during light exposure. Those results concern the oils and packs tested; they do not establish a shelf-life extension for MIRON jars or your own formulation.
Choose the whole pack for your product
Think about the ingredients, how the jar will be filled, the matching lid and seal, and where it will be stored. Keep it closed between uses and follow the storage conditions established for your product. Confirm shelf life with stability testing in the finished pack, alongside the appropriate microbiological and safety checks.
The glass manages light exposure. The closure and seal help manage contact with the surrounding environment. Your formulation and filling process complete the picture. A premium jar is a useful part of that system; it does not sterilise the contents.
Three shapes. The same 100 ml capacity.
Our range keeps the choice focused: Ceres 100 ml, Saturn Wide 100 ml and Saturn Tall 100 ml. Each is a genuine MIRON violet glass jar, supplied empty with your custom labels. Choose the shape that gives your artwork and product the right proportions.

Ceres · 100 ml
A low, broad shape with a generous front panel. A good starting point when you want a compact jar and a spacious circular top label.
65 × 55.1 mm glass body
Flat lid

Saturn Wide · 100 ml
A fuller upright silhouette. It gives your label more height than Ceres while keeping a broader shape than Saturn Tall.
51.7 × 84.4 mm glass body
Rounded Karoo lid

Saturn Tall · 100 ml
The tallest, narrowest option of the three. Its vertical label area suits stacked typography, taller illustrations and a slender shelf presence.
48 × 95.8 mm glass body
Rounded Karoo lid
Glass-body dimensions are nominal manufacturer dimensions and exclude the lid. The 100 ml figure is fill capacity, not brimful volume. Ceres specification · Saturn Wide specification · Saturn Tall specification.
One coordinated set, fitted to each shape
The side wrap carries the main design. The top sticker gives the jar a recognisable face from above. The lid band completes the design around the closure. Each shape uses its own dimensions, so start with the matching format.
| Format | Side wrap | Top sticker | Lid band |
|---|---|---|---|
| Ceres | 200.20 × 35.86 mm | Ø55.78 mm | 200.20 × 16.11 mm |
| Saturn Wide | 160 × 64 mm | Ø42 mm | 158 × 12 mm |
| Saturn Tall | 150 × 75 mm | Ø40 mm | 147 × 12 mm |
Use the matching template; we check artwork and fit before production. Compare the formats and find print templates.
Give the glass your identity.
A label brings the brand, product name and useful information together. On dark violet glass, the spaces between labels become part of the design too.
Make the information easy to find
Give the name room to breathe, use a clear contrast for small text, and keep secondary information in a consistent place. Coordinate the top sticker and lid band with the side wrap so the jar looks considered from every angle. Leave space for the information your own product needs, such as ingredients, batch details and storage directions.
Choose the material before fine detail
White vinyl gives colour a clean background. Gold, rose gold and silver add metallic reflection. Holographic stock brings rainbow changes; glitter adds sparkle. Glow-in-the-dark stock provides a different effect after charging in light. Use open areas deliberately so the material has room to show.
White ink controls what shows through
A white underbase blocks the stock beneath it. This helps preserve the printed colour, particularly over gold and rose gold. Leave selected areas unbacked to keep the material visible, or use fuller white coverage for a more opaque design.
Gloss changes the surface
UV CMYK print has a matte, slightly textured surface. Clear full-gloss varnish adds an all-over shine. Spot gloss applies clear shine only where selected. Raised gloss builds up clear varnish for a tactile detail above the artwork. White and gloss coverage are separate choices.
Labels also change how light meets the covered parts of the jar. Opaque coverage blocks more light in those areas, while uncovered glass retains its own filtering behaviour. Research on decorated glass bottles shows that decoration can affect a pack’s light barrier. The effect depends on material and coverage; we do not assign an extra preservation figure to a custom label.
LUMEN: a different kind of light.
This paired example shows the same Saturn Tall design in light and in a simulated afterglow view. Glow stock charges in light; its unprinted areas glow brightest, while dark ink blocks the effect. This is the label material glowing, separate from clear gloss varnish and the violet glass’s filtering function.
Explore glow-in-the-dark jar labelsSame design. A different light.
Drag to compare Lumen Studio in daylight and after charging. Unprinted vinyl glows brightest; colour reduces the glow, and dark ink blocks it.

Charge under bright light, then view in the dark. Illustrative renders use the same jar model, artwork and camera; glow varies with charge, ink coverage and ambient light.
Explore glow stickers, all three MIRON jars and Mylar pouches
One design. Three carefully considered labels.
Start with the complete object, then give each surface a purpose. These steps bring our Ceres label-design guidance together with the glass guide and apply the same principles to the two Saturn formats.
Side, top and lid-band design tips
Side wrap: build the front first
Choose one clear focal point: the name, a mark or an illustration. Place it where you want the front of the jar to face, then rotate the preview to inspect the back and seam. Supporting information should sit together rather than disappearing around unrelated curves.
Use the matching jar template. Equal capacity does not mean equal dimensions: a broad Ceres wrap and a taller Saturn wrap need different layouts. Keep backgrounds extending through the supplied bleed and keep small text inside the safety guides.
Top sticker: simplify the identity
A concise symbol or short name usually reads better than shrinking the whole side layout onto the lid. Check the circle from above, then from an angle. Centre the visible artwork, not just its file boundary: a heavy illustration on one side can appear off balance.
Ceres has the largest top label of the three. Saturn Wide and Tall have smaller round stickers, so review lettering at physical size before approving it.
Lid band: make the set feel complete
Use a matching colour, a repeat, a short phrase or a restrained material accent. This is a narrow surface, so avoid trying to repeat a full information panel. Check where the band meets around the lid and how it works beside the top sticker.
The decorative band is not a certified tamper-evident seal. If your contents require a particular closure or sealing system, confirm that separately.
White backing and gloss: choose separately
On gold or rose gold, use white backing beneath colour-critical artwork and leave intentional metallic details exposed. The same choice determines which parts of holographic or glitter film show through.
Then choose the surface: matte UV colour, overall clear gloss, flat spot gloss or built-up raised clear varnish. A pale raised word remains the colour of the artwork beneath it; the effect is transparent varnish, not extra white ink.
A practical starting layout
Try an opaque name and illustration on the side, an exposed metallic border, a simple top mark and a coordinating lid band. Add raised clear gloss only to the main name. Rotate the preview and check all three panels before adding more detail.
For finer control, read our white ink and clear gloss guide. The three-jar comparison keeps the format choice separate from the artwork decision. Clear label stock is not offered on these MIRON jars.
See how the label changes the jar.
Keep the dark violet glass as the constant. Use the material, opaque backing and clear finish to create different identities. These are illustrative product renders, not photographs of a customer order or measured colour proofs.



Holographic, rainbow glitter, gold, rose gold, silver and white vinyl each have their own guide. Compare flat spot gloss with raised clear gloss, or review selective white ink.
Match the complete pack to what goes inside.
Packaging checks for your contents
Balms, creams and skincare
Think about oils, fragrance, light-sensitive ingredients, filling temperature and repeated opening. Check compatibility with the jar, seal and lid and establish storage directions for the finished product. A wipe-clean label is useful around everyday handling, but it is not proof against every ingredient or cleaning chemical.
Dried herbs, teas and botanicals
Nominal millilitres measure volume, not weight. The mass that fits depends on density and how the product settles. Trial-fill the actual jar and check the closure rather than turning 100 ml into an assumed number of grams. Light, moisture and how often the lid opens all matter.
Small-batch ranges
Keep the main mark and label hierarchy consistent, then change an accent colour, variety name or material detail. Review each variant’s small print and selected white or gloss areas. A shared design system can make different products feel related without making every label identical.
Products with specific safety requirements
Do not assume a jar is suitable for hot filling, pressure, cooking or a burning candle. Confirm the relevant manufacturer specification and validate the finished use. These jars arrive empty; selecting attractive packaging does not supply product-specific safety or labelling approval.
Before the first production run
- Trial-fill the exact jar and closure combination.
- Check the label at actual size, including small text and codes.
- Inspect opacity, material exposure and varnish selections on every panel.
- Test the filled pack under your intended storage and handling conditions.
- Confirm your product’s required information, warnings and batch details.
Design it. See your price. Make it yours.
The studio brings the jar and its three label faces together, so you can build a coordinated design before adding it to your basket.
Choose Ceres, Saturn Wide or Saturn Tall
Open the studio for your format. Its label areas already match that jar and lid.
Build your three label faces
Start from a template or add your artwork. Work across the side wrap, top sticker and lid band, then check the layout on the rotating preview.
Choose material, white ink and finish
Decide where the stock should show, where the colour needs white backing, and which details should catch the light with clear gloss or tactile raised varnish.
Review the design and price
Choose your quantity and supply option. See your price in the studio before adding to your basket. Standard UK mainland delivery is included.
Your jars, ready for your next step
Choose ready-labelled jars with all three labels applied, jars with separate labels to apply yourself, or labels only for your own matching jars and lids. Jars are supplied empty.
Dispatch after artwork approval
- Ready-labelled jars: 5–7 working days.
- Jars with separate labels: 3–5 working days.
- Labels only: 1–3 working days.
Supplier availability and complex finishes may take longer.
A few useful questions
Is ordinary dark glass the same as MIRON violet glass?
No. Dark appearance alone does not identify the optical properties. MIRON uses integral violet glass with selective light filtering. Ordinary dark, amber and black glass have different compositions and specifications; ask the supplier for performance data relevant to your product.
How do I design the side, lid sticker and lid band together?
Use the studio for your exact jar format. Build the main identity on the side wrap, simplify the round top sticker, and coordinate the narrow lid band. Review the three flat panels and the rotating assembled preview, including white backing and clear varnish selections.
Does MIRON violet glass block all UV light?
No. MIRON describes selective filtering: much of the visible spectrum is filtered while selected UVA, violet and near-infrared wavelengths can pass. It is a light-filtering packaging material, rather than an all-UV barrier.
Will a MIRON jar give my product a longer shelf life?
MIRON positions its glass as helping reduce light-induced degradation. The result for your product depends on its ingredients, closure, seal and storage conditions. Establish shelf life through stability and appropriate safety testing in the finished packaging.
Which 100 ml MIRON jars can I order from Material Instance?
Choose Ceres 100 ml, Saturn Wide 100 ml or Saturn Tall 100 ml. Ceres is short and broad with a flat lid. Both Saturn jars use rounded Karoo lids. All three have a custom side wrap, top sticker and lid band, and are supplied empty.
Can I leave the metallic or holographic stock visible?
Yes. Leave selected areas without a white underbase to show the material below. Add white beneath colour where you want to block that effect and preserve the printed artwork colour, particularly over gold or rose gold.
Is LUMEN a gloss effect?
LUMEN uses glow-in-the-dark label stock. The stock charges in light and glows in darkness; unprinted areas glow brightest and dark ink blocks the effect. Gloss is clear reflective varnish and is a separate print choice.
How do I see my price and choose how my order is supplied?
See your price in the studio before adding to your basket. Standard UK mainland delivery is included. Choose ready-labelled jars, jars with separate labels, or labels only for your own matching jars and lids.
Find the shape for your design.
Explore our Custom printed 100 ml MIRON UV violet glass jars, or open a studio and start with the jar you have in mind.
Sources & further reading
Visit MIRON, the violet-glass manufacturer, for the full range and technical information. MIRON’s sources explain the manufacturer’s material and product specifications. The independent studies below establish broader packaging principles; they are not tests of our custom jars.