How to make a sticker pack for a merch drop
Plan a vinyl sticker pack with a balanced set of artwork, sizes and finishes, and work out how many of each design to order.
Choose a set people will want to use
Start with three or four designs. Give the pack one lead illustration, one smaller mark and something that works as a simple accent. Repeat a colour or shape across the set. If every design is the same size and has the same outline, they can feel like duplicates in a pack.
Size the pack before you order
A 70 mm main design and two 30–45 mm extras are a useful starting point. Cut paper versions and put them in the sleeve or envelope. Check that the largest piece goes in without bending and that the designs feel different from each other in your hand.
For 50 packs with four different stickers in each, you need 50 copies of each design before allowing for replacements. Set up each design as its own run. Use Review proof before adding each run to the basket.
Use the finish to give one design a starring role
Try a matte base for the set, then one silver holographic or raised gloss design as the lead. A reflective vinyl or varnish accent reads well when there is room to see it. Die cut is an option for individual silhouettes. If fast peeling is the priority, compare kiss cut on the same artwork.
See the material and finish examples or build the first design in your pack.