Design a Mylar pouch label: front, back and full-face coverage
A clear pouch design starts with the right outline and a simple information hierarchy. Use this guide to make the front recognisable, the back useful and the material part of the artwork.
Begin with the actual label outline
Our current Mylar pouch is nominally 93 × 125 mm, with a 40 mm base gusset. The applied label is 89 × 121 mm. It covers almost the whole face, leaving about 2 mm of pouch film around the edge.
Use the current layout in Mylar Pouch Studio rather than borrowing an unrelated bag template. A design that looks right at another size may put small type too close to an edge or make the main artwork less prominent when fitted to this label.
Give the front one clear priority
Decide what someone should recognise first: the brand name, the product name or a distinctive image. Make that the dominant element. Supporting information should help it rather than compete with it.
Try reading the front as a small thumbnail, then at its actual finished dimensions. If every line is equally large, the important part is hard to find. Keep related information together and give the main name enough space. A bigger preview does not make tiny finished lettering easier to read.
Let the back handle the supporting details
If your design needs a description, instructions, variants or other product information, double-sided labels give it a separate place. Organise the back into short groups with clear headings. Use the same type and colour choices as the front so both faces belong to one design.
The back is useful space, not a requirement to fill every millimetre. Include the information your product actually needs. Keep the wording legible and check the content appropriate to your product before treating the packaging as ready to sell.
Use a simple front-and-back plan
| Area | Main job | Check before ordering |
|---|---|---|
| Front | Recognition: brand, name and lead image. | Can you identify the important part without zooming? |
| Back | Supporting information in readable groups. | Is the wording complete and easy to follow? |
| Outer edge | A deliberate transition to the pouch colour. | Does the design fit the actual rounded outline? |
| Specialty areas | Controlled material reveal or clear gloss. | Do the ink and gloss selections follow the intended elements? |
For single-sided orders, keep the front focused and remember that the back is supplied without an applied label.
Treat the pouch colour as part of the palette
Choose from 13 pouch colours, then select the label material. They are separate controls. The narrow film border will remain visible, so look at the artwork and its frame together.
An opaque white-vinyl label gives you a neutral base. Holographic, glitter and metallic labels can show their own material through selected parts of the artwork. A rose-gold label on a coloured pouch is not simply a pink print: the film contributes a reflection that changes with the light. Decide where that reflection should remain visible.
Plan white ink and gloss with a purpose
Use white ink beneath artwork that should block the label material underneath. Without that opaque backing, specialty film can influence the printed colours. The white areas of a supplied artwork file do not by themselves guarantee a white ink layer.
Then choose how the surface should catch the light. Flat spot gloss can pick out a logo or border; raised gloss adds a tactile clear layer to selected details. Keep those effects tied to the design hierarchy. If every element asks for attention, the effect is harder to read.
Check the source file as well as the layout
Use sharp source artwork at the finished physical size. A small web image enlarged to fill the label can become soft, even when the lettering looks large on your screen. Keep editable text as text where possible and inspect the parts with fine detail.
Follow the bleed and safe-area guides shown for the supplied template. Background artwork should continue to the required print boundary; important wording should remain comfortably inside the finished cut. Review the seal relief and pouch shape in the preview, rather than drawing a large unprinted strip that is not part of our near-full-face label.
Review both faces before you add the order
- Check that the selected pouch colour and label material are the intended combination.
- Read every line on the front and, for double-sided orders, the back.
- Inspect the cut outline, artwork position and small details.
- Check which elements have white ink and which receive gloss.
- Rotate the pouch preview and review the quantity and current delivered total.
Use our white-ink and gloss comparison if the finish choices are unfamiliar. Then open the pouch designer and build your layout.
Questions before you print
What size artwork fits your current pouch labels?
The finished applied label is 89 × 121 mm. Use the current studio template and its bleed and safe-area guides for print preparation.
Should I leave the pouch seal unlabelled?
Our near-full-face label extends across the face and its seal relief, leaving about a 2 mm film border. Follow the current template rather than adding an unrelated large top margin.
Can I use the same design on the front and back?
You can use matching artwork or make each printed face different. Review both faces and the selected print effects before ordering.