How to choose a vinyl label for a coffee bag

Measure the flat panel of a filled coffee bag, choose a label layout and compare vinyl finishes before you print.

Illustration of two kraft coffee pouches with red and blue vinyl labels inside the flat front panels.

Measure a filled bag

Stand up a filled bag of the exact type you plan to use. Measure the flat front panel between the side seals and below the zip or fold. Keep clear of the folds, the valve and areas that bulge. A label that only just fits an empty bag can end up across a seam when the bag is filled.

For example, if the dependable flat space is 90 × 110 mm, try a 70 × 85 mm paper mock-up. Hold it against several filled bags. That leaves room to apply the sticker without having to centre it to the millimetre.

Keep the range easy to read

Give the roaster’s name and coffee name the most space. If the bag changes by origin, use one dependable design system and vary one field, such as a strong colour, a large number or a clear name. Space out the names so the packs are easy to tell apart on a shelf.

For a front label and a back label, measure each side separately. A valve or a folded back seam can reduce the room available on the other side.

Pick a finish for the light around the bag

Try matte white vinyl for low glare and a solid base. Try a selective gloss accent if you want a mark to catch the light while the surrounding copy stays quieter. In both cases, check a sample on the actual bag before committing to a run, especially if the surface has a rough coating or a strong curve.

Check your bag label dimensions in Sticker Studio or explore sticker options for packaging seals.

See how gloss and matte affect the way label colours look.